The AquaClave Mark 3 remains a multi-stage system relying on five processes to deliver water to steam sterilisation equipment. The new model includes the automatic flushing system, a leak detector, USA housings and an up-rated power supply.
Meticulous attention to all stages of water processing includes 1 micron sediment removal and selection of the granular activated carbon specification.
The reverse osmosis low production AquaClave membrane has been engineered to produce exceptionally high quality in the most challenging water quality environment. To monitor performance a Total Dissolved Solids meter is supplied as part of the product.
The two-stage polishing system will remove remaining organic and non-organic residues thereby finishing the water to meet all AutoClave operating standards.
Commercial Advantages – The availability of this high-quality water ON TAP avoids the purchasing of bottled distilled water, avoids storage challenges, minimises AutoClave maintenance costs and reduces the damage to instruments from tap water rinsing makes buying an AquaClave Mark 3 an intelligent decision.
Features:
- Watermark Certified Product
- 5 Stage Filtration
- Dual Element Boost Pump
- Membrane Capacity: 200 GPD
- Locking Power Connection Lead
- 24VDC Pump and Solenoids
- Faucet, 500 KPA PLV Check vale
- Automatic Flush Controller
- Pressure Switches: 1 x High and 1 x Low Pressure
- Leak Detector Switch and Drip Tray
- USA Manufactured Filter Housings and Membrane
Specifications:
| Rated Delivery Rate |
750 lpd (200 GPD) Unrestricted Flow |
| Water Supply Pressure |
< 6 Bar |
| Water Supply Temperature |
6 to 30°C (Do not allow supply to freeze) |
| Power Supply |
240VAC, 0.5A / 24VDC, 2.5A |
| Water Delivery Pressure |
2.6 Bar (40 psi) adjustable |
| Water Storage Capacity |
60L tank |
| Dimensions |
46cm W x 54cm H x 23cm D |